Tendencias emergentes en la investigación sobre técnicas de adhesión dental en odontología restauradora: un análisis bibliométrico
DOI:
https://doi.org/10.23857/dc.v10i4.4174Palabras clave:
Análisis bibliométrico, odontología restauradora, tendencias emergentes, técnicas de adhesiónResumen
Las técnicas de adhesión dental en odontología restauradora han evolucionado significativamente, mejorando la durabilidad y efectividad de las restauraciones. Estas técnicas son cruciales para la unión de materiales como resinas compuestas y cerámicas al tejido dental, asegurando el éxito de los tratamientos restauradores. La investigación se ha centrado en aspectos clave como la fuerza de adhesión, durabilidad y biocompatibilidad, subrayando su relevancia tanto en la práctica clínica como en la innovación técnica. Este artículo presenta un análisis bibliométrico de las tendencias emergentes en la investigación sobre técnicas de adhesión dental, utilizando la base de datos SCOPUS para mapear documentos de alto impacto. El estudio proporciona una evaluación del estado actual de la investigación, destacando a los autores, revistas e instituciones más influyentes. Además, analiza las redes de colaboración científica y los patrones de producción académica, proporcionando una visión clara de las principales tendencias y futuras direcciones de investigación en este campo. Los resultados demuestran que existe diversidad de colaboración entre autores e instituciones, autores más influyentes en el campo pertenecen mayormente a instituciones de países con alto desarrollo en investigación científica, como Estados Unidos, Brasil y Alemania. Las revistas más destacadas en términos de impacto y volumen de publicaciones son Operative Dentistry, Dental Materials y Journal Of Dentistry. Las futuras líneas de investigación identificadas incluyen el desarrollo de adhesivos biocompatibles, el estudio de la longevidad clínica de las restauraciones adhesivas y la integración de tecnologías nuevas tecnologías en los procedimientos restauradores.
Citas
Accorinte, M., Loguercio, A., Reis, A., Muench, A., & Araújo, V. (2005). Response of human pulp capped with a bonding agent after bleeding control with hemostatic agents. Operative Dentistry, 30(2), 147-155. https://acortar.link/yNHpWC
Amin, F., Fareed, M., Zafar, M., Khurshid, Z., Palma, P., & Kumar, N. (2022). Degradation and Stabilization of Resin-Dentine Interfaces in Polymeric Dental Adhesives: An Updated Review. Coatings, 12(8), Article 8. https://doi.org/10.3390/coatings12081094
Angulo, A., Aguilar, M., Rodríguez, I., Montenegro, J., Cáceres, D., & Liscano, Y. (2024). Electroencephalography-Based Brain-Computer Interfaces in Rehabilitation: A Bibliometric Analysis (2013–2023). Sensors, 24(22), Article 22. https://doi.org/10.3390/s24227125
Aria, M., & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis. Journal of Informetrics, 11(4), 959-975. https://doi.org/10.1016/j.joi.2017.08.007
Balanko, M. (1992). Bonded Silver Amalgam Restorations. Journal of Esthetic and Restorative Dentistry, 4(2), 54-57. https://doi.org/10.1111/j.1708-8240.1992.tb00660.x
Barone, A., Derchi, G., Rossi, A., Marconcini, S., & Covani, U. (2008). Longitudinal clinical evaluation of bonded composite inlays: A 3-year study. Quintessence International (Berlin, Germany: 1985), 39(1), 65-71. https://acortar.link/N7nMGJ
Basile, V., Giacalone, M., & Cozzucoli, P. (2022). The Impacts of Bibliometrics Measurement in the Scientific Community A Statistical Analysis of Multiple Case Studies. Review of European Studies, 14(3), Article 3. https://doi.org/10.5539/res.v14n3p10
Basualdo, J., Nascimento, F., Damasceno e Souza Chiari, M., Aliaga-Galvez, R., Ñaupari-Villasante, R., Miranda, C., Pardo-Díaz, C., Gutiérrez, M., Covarrubias, C., Loguercio, A., & Fernández, E. (2024). Evaluation of adhesive properties and enzymatic activity at the hybrid layer of a simplified adhesive loaded with 0.2 % Cu and 5 % ZnO nanoparticles: A Randomized Clinical Trial and ex vivo analysis. Journal of Dentistry, 149, 105283. https://doi.org/10.1016/j.jdent.2024.105283
Bayindir, F., Akyil, M., & Bayindir, Y. (2003). Effect of Eugenol and Non-eugenol Containing Temporary Cement on Permanent Cement Retention and Microhardness of Cured Composite Resin. Dental Materials Journal, 22(4), 592-599. https://doi.org/10.4012/dmj.22.592
Blatz, M., Oppes, S., Chiche, G., Holst, S., & Sadan, A. (2008). Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading. Quintessence International (Berlin, Germany: 1985), 39(1), 23-32. https://acortar.link/l4JHfM
Braem, M., Lambrechts, P., & Vanherle, G. (1986). Clinical evaluation of dental adhesive systems. Part II: A scanning electron microscopy study. Journal of Prosthetic Dentistry, 55(5), 551-560. https://doi.org/10.1016/0022-3913(86)90030-2
Britto, C., García, V., Mamani, A., & Urteaga, R. (2020). Diferentes soluciones para mejorar la adhesión en odontología restauradora [Tesis de Pregrado. Universidad César Vallejo]. Repositorio Institucional - UCV. https://repositorio.ucv.edu.pe/handle/20.500.12692/71607
Cadenaro, M., Josic, U., Maravi?, T., Mazzitelli, C., Marchesi, G., Mancuso, E., Breschi, L., & Mazzoni, A. (2023). Progress in Dental Adhesive Materials. Journal of Dental Research. https://doi.org/10.1177/00220345221145673
Chadwick, Mason, & Sharp. (1998). Attempted evaluation of three porcelain repair systems—What are we really testing? Journal of Oral Rehabilitation, 25(8), 610-615. https://doi.org/10.1046/j.1365-2842.1998.00283.x
Cho, N., Ferracane, J., & Lee, I. (2013). Acoustic Emission Analysis of Tooth-Composite Interfacial Debonding. Journal of Dental Research, 92(1), 76-81. https://doi.org/10.1177/0022034512465757
de Paris, T., Perdigão, J., de Paula, E., Coppla, F., Hass, V., Scheffer, R., Reis, A., & Loguercio, A. (2020). Five-year clinical evaluation of a universal adhesive: A randomized double-blind trial. Dental Materials: Official Publication of the Academy of Dental Materials, 36(11), 1474-1485. https://doi.org/10.1016/j.dental.2020.08.007
Denehy, G., & Torney, D. (1976). Internal enamel reinforcement through micromechanical bonding. Journal of Prosthetic Dentistry, 36(2), 171-175. https://doi.org/10.1016/0022-3913(76)90139-6
Ding, Y., Yan, E., Frazho, A., & Caverlee, J. (2009). PageRank for ranking authors in co-citation networks. Journal of the American Society for Information Science and Technology, 60(11), 2229-2243. https://doi.org/10.1002/asi.21171
Donthu, N., Kumar, S., Mukherjee, D., Pandey, N., & Lim, W. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. https://doi.org/10.1016/j.jbusres.2021.04.070
Dua, D., Dua, A., Anagnostaki, E., Poli, R., & Parker, S. (2022). Effect of different types of adhesive systems on the bond strength and marginal integrity of composite restorations in cavities prepared with the erbium laser—A systematic review. Lasers in Medical Science, 37(1), 19-45. https://doi.org/10.1007/s10103-021-03294-1
Duque, P., & Duque, E. (2022). Tendencias emergentes en la literatura sobre el compromiso del cliente: Un análisis bibliométrico. Estudios Gerenciales, 38(162), 120-132. http://www.scielo.org.co/scielo.php?pid=S0123-59232022000100120&script=sci_arttext
Eder, A., & Wickens, J. (1996). Surface treatment of gold alloys for resin adhesion. Quintessence International (Berlin, Germany: 1985), 27(1), 35-40. https://acortar.link/l4JHfM
Guilherme, M., Magalhães, C., & Campos, M. (2002). The effect of rebonding on microleakage of class V aesthetic restorations. Operative Dentistry, 27(4), 396-402. https://pubmed.ncbi.nlm.nih.gov/12120778/
Farah, C., Orton, V., & Collard, S. (1998). Shear bond strength of chemical and light-cured glass ionomer cements bonded to resin composites. Australian Dental Journal, 43(2), 81-86. https://doi.org/10.1111/j.1834-7819.1998.tb06095.x
Häfer, M., Schneider, H., Rupf, S., Busch, I., Fuchß, A., Merte, I., Jentsch, H., Haak, R., & Merte, K. (2013). Experimental and clinical evaluation of a self-etching and an etch-and-rinse adhesive system. The Journal of Adhesive Dentistry, 15(3), 275-286. https://doi.org/10.3290/j.jad.a29633
Hardison, J., Rafferty-Parker, D., Mitchell, R., & Bean, L. (1989). Radiolucent halos associated with radiopaque composite resin restorations. Journal of the American Dental Association (1939), 118(5), 595-597. https://doi.org/10.14219/jada.archive.1989.0089
Hassan, K., & Khier, S. (2006). Composite resin restorations of large class II cavities using split-increment horizontal placement technique. General Dentistry, 54(3), 172-177. https://acortar.link/48tZNY
Hu, X., Sun, T., Kuang, B., Sun, Y., Chen, L., & Ding, H. (2023). Bibliometric analysis of dental adhesives: Research status and frontier development. Frontiers in Materials, 10. https://doi.org/10.3389/fmats.2023.1288717
Jahn, K., Geitel, B., Zimmer, S., Barthel, C. & Roulet, J. (2002). Kinetic cavity preparation—Hit or flop?. Annals of the Royal Australasian College of Dental Surgeons, 16, 26-29. https://europepmc.org/article/med/14507127
Jung, S. N., & Rüttermann, S. (2022). Influence of mechanical and chemical pre-treatments on the repair of a hybrid ceramic. Dental Materials: Official Publication of the Academy of Dental Materials, 38(7), 1140-1148. https://doi.org/10.1016/j.dental.2022.05.003
Khurana, P., & Sharma, K. (2021). Impact of h-index on authors ranking: A comparative analysis of Scopus and WoS (arXiv:2102.06964). arXiv. https://arxiv.org/abs/2102.06964
Krämer, N., Reinelt, C., García-Godoy, F., Taschner, M., Petschelt, A., & Frankenberger, R. (2009). Nanohybrid composite vs. fine hybrid composite in extended class II cavities: Clinical and microscopic results after 2 years. American Journal of Dentistry, 22(4), 228-234. https://europepmc.org/article/med/19824560
Kubo, S., Kawasaki, A., & Hayashi, Y. (2011). Factors associated with the longevity of resin composite restorations. Dental Materials Journal, 30(3), 374-383. https://doi.org/10.4012/dmj.2010-191
Lima, C., & Bonetti, J. (2020). Bibliometric analysis of the scientific production on coastal communities’ social vulnerability to climate change and to the impact of extreme events. Natural Hazards, 102(3), 1589-1610. https://doi.org/10.1007/s11069-020-03974-1
Loguercio, A., Mânica, D., Ferneda, F., Zander-Grande, C., Amaral, R., Stanislawczuk, R., Carvalho, R., Manso, A., & Reis, A. (2010). A Randomized Clinical Evaluation of a One- and Two-step Self-etch Adhesive Over 24 Months. Operative Dentistry, 35(3), 265-272. https://doi.org/10.2341/09-241-C
Lozada, F. (2024). Factores que influyen en la restauración en dientes anteriores. Revista Cubana de Investigaciones Biomédicas, 42(2), Article 2. https://revibiomedica.sld.cu/index.php/ibi/article/view/3365
Luo, Y., Tay, F., Lo, E., & Wei, S. (2000). Marginal adaptation of a new compomer under different conditioning methods. Journal of Dentistry, 28(7), 495-500. https://acortar.link/Q9K2sA
Tejeda, R., & Viana, A. (2023). Presencia de microfiltraciones en restauraciones directas de resina compuesta clase I en premolares y molares superiores e inferiores [Tesis de Grado, Universidad Tecnológica Centroamericana UNITEC]. https://repositorio.unitec.edu/xmlui/handle/123456789/12931
McConnell, R., Sabbagh, J., de la Macorra, J., Lund, A., & Cassidy, M. (2011). Frequently asked questions in composite restorative dentistry. Dental Update, 38(8), 549-556. https://doi.org/10.12968/denu.2011.38.8.549
Nihei, T., Kurata, S., Ohashi, K., Umemoto, K., & Teranaka, T. (2011). Study on ceramic coating on the enamel surface using a carbon dioxide laser. Dental Materials Journal, 30(2), 212-215. https://doi.org/10.4012/dmj.2010-111
Nikaido, T., Kunzelmann, K.-H., Chen, H., Ogata, M., Harada, N., Yamaguchi, S., Cox, C., Hickel, R., & Tagami, J. (2002). Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dental Materials, 18(3), 269-275. https://doi.org/10.1016/S0109-5641(01)00048-3
Ninkov, A., Frank, J. R., & Maggio, L. A. (2022). Bibliometrics: Methods for studying academic publishing. Perspectives on Medical Education, 11(3), 173-176. https://doi.org/10.1007/s40037-021-00695-4
Nuñez, A., & Maridueña, M. (2019). Effectiveness of eighth generation adhesives in direct restoration after dental clearance: Efectividad de los adhesivos de octava generación en restauración directas posterior a un aclaramiento dental. Journal of American Health, 2(1), 1-12. https://www.jah-journal.com/index.php/jah/article/view/11
Perdigão, J., Araujo, E., Ramos, R., Gomes, G., & Pizzolotto, L. (2021). Adhesive dentistry: Current concepts and clinical considerations. Journal of Esthetic and Restorative Dentistry, 33(1), 51-68. https://doi.org/10.1111/jerd.12692
Peumans, M., De Munck, J., Van, K., Poitevin, A., Lambrechts, P., & Van, B. (2012). A 13-year clinical evaluation of two three-step etch-and-rinse adhesives in non-carious class-V lesions. Clinical Oral Investigations, 16(1), 129-137. https://doi.org/10.1007/s00784-010-0481-z
Peutzfeldt, A., Sahafi, A., & Flury, S. (2011). Bonding of Restorative Materials to Dentin With Various Luting Agents. Operative Dentistry, 36(3), 266-273. https://doi.org/10.2341/10-236-L
Piemjai, M., & Lenglerdphol, S. (2017). Effect of strong tooth-bleaching with 38% hydrogen peroxide on marginal seal of dental restorations using self-etch and total-etch adhesives. Journal of Esthetic and Restorative Dentistry, 30(2), 153-159. https://doi.org/10.1111/jerd.12354
Qeblawi, D., Muñoz, C., Brewer, J., & Monaco, E. (2010). The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement. The Journal of Prosthetic Dentistry, 103(4), 210-220. https://doi.org/10.1016/S0022-3913(10)60033-9
Ritter, A., Heymann, H., Swift, E., Sturdevant, J., & Wilder, A. (2008). Clinical Evaluation of an All-in-one Adhesive in Non-Carious Cervical Lesions with Different Degrees of Dentin Sclerosis. Operative Dentistry, 33(4), 370-378. https://doi.org/10.2341/07-128
Sa, R., Xu, Y., Pan, X., Wang, Y., Lin, Z., Zhang, X., & Zhang, B. (2023). A bibliometric analysis of research progress on pharmacovigilance and cancer from 2002 to 2021. Frontiers in Oncology, 13. https://doi.org/10.3389/fonc.2023.1078254
Sa?d?ço?lu, M., Yenice, M., & Tel, M. (2024). The Use of Energy Simulations in Residential Design: A Systematic Literature Review. Sustainability, 16(18), 8138. https://www.mdpi.com/2071-1050/16/18/8138
Sahin, Z., Ozer, N., Akan, T., K?l?carslan, M., & Karaagacl?oglu, L. (2024). The effect of various surface treatments on the repair bond strength of denture bases produced by digital and conventional methods. Odontology, 112(3), 782-797. https://doi.org/10.1007/s10266-023-00881-2
Sebold, M., André, C., Sahadi, B., Breschi, L., & Giannini, M. (2021). Chronological history and current advancements of dental adhesive systems development: A narrative review. Journal of Adhesion Science and Technology, 35(18), 1941-1967. https://doi.org/10.1080/01694243.2020.1865611
Singh, V., Singh, P., Karmakar, M., Leta, J., & Mayr, P. (2021). The journal coverage of Web of Science, Scopus and Dimensions: A comparative analysis. Scientometrics, 126(6), 5113-5142. https://doi.org/10.1007/s11192-021-03948-5
Sonoda, H., Sasafuchi, Y., Kitasako, Y., Arakawa, M., Otsuki, M., & Tagami, J. (2002). Pulpal response to a fluoride-releasing all-in-one resin bonding system. Operative Dentistry, 27(3), 271-277. https://europepmc.org/article/med/12022459
Szmidt, M., Górski, M., Barczak, K., & Buczkowska-Radli?ska, J. (2017). Direct Resin Composite Restoration of Maxillary Central Incisors with Fractured Tooth Fragment Reattachment: Case Report. The International Journal of Periodontics & Restorative Dentistry, 37(2), 249-253. https://doi.org/10.11607/prd.2713
Tang, Q., Yang, X., Sun, M., He, M., Sa, R., Zhang, K., Zhu, B., & Li, T. (2024). Research trends and hotspots of post-stroke upper limb dysfunction: A bibliometric and visualization analysis. Frontiers in Neurology, 15. https://doi.org/10.3389/fneur.2024.1449729
Thangavel, P., & Chandra, B. (2023). Two Decades of M-Commerce Consumer Research: A Bibliometric Analysis Using R Biblioshiny. Sustainability, 15(15), Article 15. https://doi.org/10.3390/su151511835
Ullah, R., Asghar, I., & Griffiths, M. (2023). An Integrated Methodology for Bibliometric Analysis: A Case Study of Internet of Things in Healthcare Applications. Sensors, 23(1), Article 1. https://doi.org/10.3390/s23010067
Van, J., Hasselrot, L., Örmin, A., & Olofsson, A.-L. (2001). Restorations with extensive dentin/enamel-bonded ceramic coverage. A 5-year follow-up. European Journal of Oral Sciences, 109(4), 222-229. https://doi.org/10.1034/j.1600-0722.2001.00063.x
Van, J., & Pallesen, U. (2011a). Clinical performance of a hybrid resin composite with and without an intermediate layer of flowable resin composite: A 7-year evaluation. Dental Materials, 27(2), 150-156. https://doi.org/10.1016/j.dental.2010.09.010
Van, J., & Pallesen, U. (2011b). Four-year clinical evaluation of Class II nano-hybrid resin composite restorations bonded with a one-step self-etch and a two-step etch-and-rinse adhesive. Journal of Dentistry, 39(1), 16-25. https://doi.org/10.1016/j.jdent.2010.09.006
Van, A., De Munck, J., Van, K., Poitevin, A., Peumans, M., & Van, B. (2013). Bulk-filling of high C-factor posterior cavities: Effect on adhesion to cavity-bottom dentin. Dental Materials, 29(3), 269-277. https://doi.org/10.1016/j.dental.2012.11.002
Van, B., Yoshihara, K., Van, K., Yoshida, Y., & Peumans, M. (2020). From Buonocore’s Pioneering Acid-Etch Technique to Self-Adhering Restoratives. A Status Perspective of Rapidly Advancing Dental Adhesive Technology. The Journal of Adhesive Dentistry, 22(1), 7-34. https://doi.org/10.3290/j.jad.a43994
Xu, C., & Wang, Y. (2012, enero 1). Collagen Cross Linking Increases Its Biodegradation Resistance in Wet Dentin Bonding. | EBSCOhost. https://doi.org/10.3290/j.jad.a21494
Yoshikawa, T., Sano, H., Burrow, M., Tagami, J., & Pashley, D. (1999). Effects of Dentin Depth and Cavity Configuration on Bond Strength. Journal of Dental Research, 78(4), 898-905. https://doi.org/10.1177/00220345990780041001
Zaharia, C., Oancea, R., Gabor, A., & Negru?iu, M.-L. (2020). New Trends in Dental Adhesion—A Systematic Review. Timisoara Med, 2020(1), Article 1. https://doi.org/10.35995/tmj20200107
Zhang, J., Yu, Q., Zheng, F., Long, C., Lu, Z., & Duan, Z. (2016). Comparing keywords plus of WOS and author keywords: A case study of patient adherence research. Journal of the Association for Information Science and Technology, 67(4), 967-972. https://doi.org/10.1002/asi.23437
Zhu, J., & Liu, W. (2020). A tale of two databases: The use of Web of Science and Scopus in academic papers. Scientometrics, 123(1), 321-335. https://doi.org/10.1007/s11192-020-03387-8
Zupic, I., & ?ater, T. (2015). Bibliometric Methods in Management and Organization. Organizational Research Methods, 18(3), 429-472. https://doi.org/10.1177/1094428114562629
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2024 Henry Fabricio Mejía Mosquera, Cristian Roberto Sigcho Romero
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Authors retain copyright and guarantee the Journal the right to be the first publication of the work. These are covered by a Creative Commons (CC BY-NC-ND 4.0) license that allows others to share the work with an acknowledgment of the work authorship and the initial publication in this journal.
